A manual pallet jack lifts and moves palletised loads at floor level using a hand-pumped hydraulic system - the simplest, most reliable way to shift stock between bays, loading docks and trucks without needing power or charging downtime. The choice comes down to how much lifting you're doing day to day: a manual jack keeps cost down for lighter, occasional moves, while a Semi-Electric Pallet Jack powers the lift for heavier or more frequent loads, and a Full Electric Pallet Jack powers both lift and drive for the longest, busiest runs. Going manual keeps the jack simple, not less capable.
Our range spans standard Manual Pallet Jacks in a variety of fork sizes to suit standard and non-standard pallets. Every unit ships Australia-wide and is backed by local stock and factory warranty.
Not sure which fork size or capacity suits your site? Call us at 1300 053 165 - we know these machines and are happy to talk it through.
Stainless Steel Pallet Jack - 2500kg Capacity - 685mm Wide Designed specifically for wet, food handling, and corrosive environments, this stainless...
View full details
The EP E25NQ is a 2,500 kg capacity manual pallet jack with a quick-lift hydraulic system - reaching maximum fork height in just 7 pumps. The narro...
View full details
The EP E25SQ is a 2,500 kg capacity manual pallet jack with a quick-lift hydraulic system — reaching maximum fork height in just 7 pumps. The 685 m...
View full details
The Niuli PDS25 is a 2,500 kg capacity manual pallet jack with a built-in weighing scale, allowing operators to weigh loads as they lift - no separ...
View full details
The Niuli SB50 is a 5,000 kg capacity heavy-duty manual pallet jack - the highest-capacity manual jack in the Niuli range. Built for a lifetime of ...
View full details
The Niuli EL240 is a 2,000 kg capacity extra long manual pallet jack with 2,400 mm forks - the longest fork option in the Niuli range. Built with e...
View full details
The Niuli EL200 is a 2,500 kg capacity extra long manual pallet jack with 2,000 mm forks. Built with extra heavy-duty 5 mm thick channel steel fram...
View full details
The Niuli EL180 is a 2,500 kg capacity extra long manual pallet jack with 1,800 mm forks. Built with extra heavy-duty 5 mm thick channel steel fram...
View full details
The Niuli EL160 is a 2,500 kg capacity extra long manual pallet jack with 1,600 mm forks. Built with a heavy-duty steel frame, the EL160 handles st...
View full details
The Niuli EL140 is a 2,500 kg capacity extra long manual pallet jack with 1,400 mm forks. Built with a heavy-duty steel frame, the EL140 provides 2...
View full details
The Niuli SN25 is a 2,500 kg capacity short narrow manual pallet jack with 700 mm forks - designed for moving vending machines, machinery, safes, s...
View full details
The Niuli EN34 is a 2,500 kg capacity extra narrow manual pallet jack with a 340 mm outer fork width - the narrowest pallet jack in the Niuli range...
View full details
The Niuli N25L is a 2,500 kg capacity narrow low profile manual pallet jack with a 65 mm minimum fork height - 20 mm lower than standard pallet jac...
View full details
The Niuli S30L is a 3,000 kg capacity standard low profile manual pallet jack with a 65 mm minimum fork height - 20 mm lower than standard pallet j...
View full details
The Niuli NA25 is a narrow-body manual pallet jack rated up to 2,500 kg (5,511 lbs). With a 550 mm outer fork width and 230 mm clearance between th...
View full details
The Niuli SA30 is a 3,000 kg capacity standard manual pallet jack built for the demands of Australian warehouses and industrial sites. Heavy-duty s...
View full details
