The Niuli PFH15 is a 1,500 kg capacity full electric pallet jack specially designed for operation in freezer and cold storage environments as well as normal warehouse temperatures. Full electric drive and lift handle all pushing, lifting, and lowering. The extra heavy-duty frame, reinforced foot protection, and drive system guard are built to withstand the demands of continuous cold-chain operations.
Available in two fork widths: Narrow (560 mm) for Euro pallets and tight cold-store aisles, or Standard (685 mm) for Australian Standard, CHEP, and Loscam pallets. A Curtis DC controller, built-in charger, and turtle-mode button for upright handle driving are standard on both variants.
Freezer and Cold Storage Rated
Specially designed for use in very low temperatures. Components, seals, and lubricants are selected for reliable operation in freezer environments where standard electric jacks can fail. Also operates at normal warehouse temperatures - no dedicated warm-environment unit required.
Full Electric Drive and Lift
Forward, reverse, lift, and lower are all powered. No manual pumping. Reduces operator fatigue, which is especially critical in cold environments where shifts are physically demanding.
Heavy-Duty Construction
Extra heavy-duty frame with side support rear wheels to prevent tilting. Reinforced foot protection and drive system guard. More resilient to impacts and water damage than standard-duty models.
Turtle Button - Upright Handle Drive
Drive with the handle in the upright position using the turtle button for low-speed precision movement. Useful in confined cold-store aisles and docking situations.
Built-In Charger
A 2 m charging cable plugs directly into a standard power point. Powered by 2 × 12V/70Ah maintenance-free deep cycle batteries with a Curtis DC controller.
| Specification | Narrow (PFH15) | Standard (PFH15W) |
|---|---|---|
| Load Capacity | 1,500 kg | |
| Operation Type | Full Electric - drive, lift, and lower (freezer rated) | |
| Fork Length | 1,150 mm | |
| Forks Outer Width | 560 mm | 680 mm |
| Clearance Between Forks | 240 mm | 360 mm |
| Single Fork Dimensions (L × W × H) | 1,150 × 160 × 50 mm | |
| Min Fork Height | 85 mm | |
| Max Fork Height | 200 mm | |
| Load Centre | 600 mm | |
| Turning Radius | 1,485 mm | |
| Ground Clearance (centre) | 30 mm min | |
| Drive Motor | 0.65 kW | |
| Lift Motor | 0.8 kW | |
| Battery | 2 × 12V/70Ah deep cycle, maintenance-free | |
| Controller | Curtis DC | |
| Charger | Built-in, 2 m cable, standard power point | |
| Wheel Material | Polyurethane - non-marking, anti-slip | |
| Drive Wheels | Ø210 × 70 mm | |
| Load Wheels | Ø80 × 64 mm | |
| Measurement | Narrow (PFH15) | Standard (PFH15W) |
|---|---|---|
| Overall Dimensions (L × W × H) | 167 × 56.8 × 124 cm | 167 × 69 × 124 cm |
| Unit Weight | 231 kg | 235 kg |
| Shipping Dimensions (pallet) | 170 × 120 × 146 cm | |
| Shipping Weight | 261 kg | 265 kg |
Niuli Machinery Manufacture Co., Ltd. is a specialist material handling equipment manufacturer founded in 1999 and based in Heshan City, Guangdong Province, China. Operating from a 330,000 m² production facility certified to ISO 9001:2015, Niuli exports to more than 120 countries and produces over 100 models of material handling equipment.
